ROTARY STERILIZATION SYSTEM

RSS-L1 ROTARY STERILIZATION SYSTEM

This equipment uses the method of wet-heat sterilization to sterilize the samples which need terminal sterilization, so as to ensure that the sterility degree of the product meets the industry standards or requirements. It is widely used in food, daily chemical, pharmaceutical and other industries.

BRIEF INTRODUCTION

This equipment is suitable for sterilizing samples that have been prepared and are loaded into specific specifications of containers. Heating the sterilized water to 121℃ (or higher) and then spray on the sample containers for sterilization. The superheated water is sprayed by conveying pump and spray ball. This can improve the sterility assurance level and make SAL less than 10-6, so as to achieve the perfect sterilization effect.

在滅菌過程中，盛裝樣品的容器固定在旋轉的滅菌夾具中，可以保證樣品加熱的均勻性，從而保證滅菌的均勻性。滅菌系統中有特定的溫度監測點，可以有效監測和修改整個滅菌過程的溫度，輸出滅菌曲線，保證滅菌效果。

關于 F0

F0 是指用于驗證滅菌過程中濕熱滅菌可靠性的比較參數。濕熱滅菌的參考溫度為121°C，采用具有特殊耐熱性的嗜熱脂肪芽孢桿菌作為微生物指示劑。將不同的溫度和時間換算成121°C下相同殺菌效果的濕熱滅菌等效時間（分鐘），即F0值。

?

技術參數

滅菌方式：濕熱滅菌

滅菌夾具：可旋轉，確保樣品均勻加熱

試驗次數： >3

溫度測量：0~150°C、±0.1°C

總功率：7.5kW

總容量：1ml~2000ml

樣品數量：1~72

最大耐壓：0.3Mpa

數據：監控并輸出工藝參數值和曲線（如溫度、壓力、F0值、時間、速度、流量等）

符合法規：符合GMP、FDA等健康水平、數據和驗證要求。

操作：全自動操作。